cine e mount lenses maintenance techniques

cine e mount lenses maintenance techniques include the following aspects:
Using the front and back covers of the lens: The front and back covers of the lens are standard. When using, make sure to cover the front and back covers after each use to avoid scratches on the lens and electronic interface caused by hard objects, which may affect the imaging quality. If you are concerned about losing the lens cover, you can consider using anti loss buckles to secure it to the cine e mount lenses shoulder strap.
Installing a light shield and UV filter: The light shield can prevent strong light from affecting the image and provide a buffering effect when the lens falls, protecting the lens. The UV filter is installed at the front end of the lens, which can effectively prevent scratches and dust from getting on the lens, especially when shooting outdoors, such as on beaches. The UV filter can prevent wind and sand from damaging the lens.
Dust prevention measures: When not using the cine e mount lenses, remember to place a UV lens or skylight on the lens to prevent dust from entering the lens. Use an air blower to remove large particles of dust and avoid scratching the lens.
Wiping the lens: When wiping the lens, do not apply force or use water or alcohol. The correct approach is to gently blow the lens and then use a small brush to remove dust.
Temperature control: The lens is very sensitive to temperature, and temperatures that are too high or too low can accelerate damage to the lens. Avoid using the lens at extreme temperatures to prevent fogging.
Moisture protection: Humidity is an important factor affecting the lens. A moisture-proof box can be placed at home to protect the cine e mount lenses and lens, especially in rainy or humid environments, to prevent the lens from getting moldy and damp.
Corrosion prevention: After shooting in damp environments such as the seaside, promptly wipe the body and lens surface with a damp tissue to prevent salt corrosion of the lens and body.
Prevent direct sunlight: Avoid using the cine e mount lenses to capture solar eclipses or strong light for a long time to avoid damaging the CMOS sensor.
Anti fall measures: Try to use high-quality tripods and light shields. The light shields not only block light, but also provide cushioning in case of falling, protecting the lens.
Handling when not in use for a long time: Remember to remove the battery when not in use for a long time to prevent the battery from swelling and damaging the cine e mount lenses.