Why Remodel Wiring?
Old wiring isn’t just outdated — it can be dangerous. In many older homes, the system may not handle today’s tech. That’s why many homeowners choose to remodel wiring Placer County to keep up with modern demands like phones, TVs, gaming consoles, and smart home gadgets. That’s a lot of power!
Here are a few reasons to remodel wiring:
Safety: Old wires can spark, overheat, or cause fires.
Efficiency: New wiring can handle modern appliances better.
Code Compliance: Placer County has updated codes. Older systems may not meet those rules.
Resale Value: Updated wiring makes your property more attractive to buyers.
If your lights flicker, breakers trip often, or outlets get hot — it’s time to check your wiring.
Plan Ahead
Before you start tearing down walls or painting rooms, make a plan for your electrical system. Think about what you'll need — not just now, but in the future too.
Ask yourself:
Will you be adding new outlets?
Are you upgrading your kitchen or bathroom?
Do you want smart home systems?
Will you need EV charging?
Write everything down. When you hire an electrician, they’ll need this info to design a system that works for you.
Get a Professional Inspection
Don't guess what's behind your walls. A licensed electrician can do a full inspection and tell you what needs replacing.
They’ll check:
Wire condition
Breaker panel safety
GFCI outlets in wet areas
Grounding systems
Code compliance
If you're in Placer County, hiring a local professional is key. They’ll know the local codes, permits, and inspection processes. And that can save you time and trouble later.
Pull Permits
Yes, permits can be a hassle. But they’re not optional. Electrical work in Placer County — especially wiring remodels — requires proper permits.
Your electrician will usually handle this for you. Inspections follow after work is done to ensure safety and code compliance. Don’t skip this step. If you ever sell the house or file insurance, unpermitted work can cause big problems.
Demo and Access
To replace wiring, electricians need access. That means opening up walls, ceilings, or crawl spaces.
Here are a few tips:
If you're already doing a full remodel, coordinate with your electrician early.
If not, they may be able to work around and minimize wall damage.
Some jobs only need partial rewiring — like a kitchen or basement.
Your electrician will explain the best approach for your space.
Install New Wiring
This is where the real work begins. Your electrician will remove the old wiring and install new ones. This includes:
Wires for outlets and switches
Circuit breakers
Grounding wires
Dedicated circuits for appliances
Outdoor and garage outlets
New lighting systems
Modern homes need more circuits than older ones. Your panel may need an upgrade too — especially if it's still running on a fuse box or has limited amps.
Inspection and Testing
Once the new wiring is in, the county inspector will come out. They’ll check:
Is the wiring up to code?
Is it grounded properly?
Are GFCI and AFCI protections in place?
Are wire sizes correct for each circuit?
After the inspection passes, the electrician will test everything: lights, switches, outlets, appliances. If anything seems off, they’ll fix it before closing the walls.
Patch and Finish
With the wiring done and tested, it’s time to patch the walls. If your remodel includes drywall, painting, or tiling, now’s the time to wrap that up.
A good electrician will leave your space clean, safe, and ready for the next step.
Cost of Remodel Wiring in Placer County
The cost can vary depending on the size of your home, the scope of the remodel, and how much wiring needs to be updated.
Here’s a rough guide:
Small room update: $1,500–$3,000
Kitchen or bathroom remodel: $3,000–$6,000
Whole house rewiring: $8,000–$20,000+
These are ballpark figures. You should get a detailed quote after your inspection.
When Should You Remodel Wiring?
Not sure if you need to update your wiring? Here are some signs:
Your home was built before the 1980s
You still have aluminum or knob-and-tube wiring
Breakers trip often
You hear buzzing from outlets
You smell burning near switches
Lights flicker or dim often
Not enough outlets for your needs
If you said "yes" to any of those, it's time to act.
Choosing the Right Electrician in Placer County
Don't try to remodel wiring yourself. It’s risky and illegal without a license.
Here’s what to look for in a good electrician:
Licensed and insured in California
Experience with remodel wiring
Local knowledge of Placer County codes
Transparent pricing and written estimates
Good reviews or referrals
Talk to at least 2-3 electricians before you hire one. Ask questions. Compare quotes. Look for someone who explains things clearly and makes you feel confident.
Make the Smart Choice for Your Home
Updating wiring isn’t flashy. You don’t “see” the results like you do with new paint or floors. But it's one of the most important upgrades you can make.
It makes your home safer. More efficient. And ready for the future.
If you're planning a remodel in Placer County, take the time to include wiring in your plan. Your future self — and your family — will thank you.
FAQs About Remodel Wiring in Placer County
Q. Do I need a permit to remodel wiring in Placer County?
A. Yes. Any major electrical work requires a permit. A licensed electrician can help file the correct paperwork.
Q. Can I remodel wiring by myself?
A. No. In California, only licensed electricians can perform wiring remodels. DIY wiring is unsafe and illegal.
Q. How long does it take to remodel wiring?
A. It depends on the size of the project. A kitchen might take 1–2 days. A whole house could take 1–2 weeks.
Q. Will I need to upgrade my electrical panel too?
A. Maybe. If your panel is old or doesn’t have enough capacity, your electrician may recommend upgrading it during the wiring remodel.
Q. What kind of wiring is used today?
A. Modern wiring uses copper, usually NM (non-metallic) cable like Romex. It’s safer, more efficient, and code-compliant.
